IviRFSigGen Configure Arb [ARB]
IviRFSigGenArbGenerator Capability Group
This VI configures the ARB generator by specifying the sample frequency and filter frequency.
 |
instrument handle The instrument handle that you obtain from the IviRFSigGen Initialize or IviRFSigGen Initialize With Options VIs. |
 |
clock frequency Specifies the sample frequency. The waveform is generated with this clock frequency. The driver uses this value to set the IviRFSigGen>>ARB Generator>>ARB Clock Frequency property.
Units: Hertz Default Value: 100.0 MHz |
|
filter frequency Specify the filter frequency which is the cut-off frequency of the low pass filter used for anti aliasing the output waveform. The filter frequency normally is lower than the clock frequency.
The driver uses this value to set the IviRFSigGen>>ARB Generator>>ARB Filter Frequency property. Units: Hertz Default Value: 10.0 KHz |
 |
error in (no error) The error in cluster can accept error information wired from VIs previously called. Use this information to decide if any functionality should be bypassed in the event of errors from other VIs.
The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed. |
 |
instrument handle out The instrument handle that you obtain from the IviRFSigGen Initialize or IviRFSigGen Initialize With Options VIs. |
 |
error out The error out cluster passes error or warning information out of a VI to be used by other VIs.
The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed. |